Hacker Newsnew | past | comments | ask | show | jobs | submit | Opossum's commentslogin

No. The sintering happens layer by layer. So you can print hollow parts.


You can print them, but the "hollow" chamber you print will be full of powder with no way to remove said powder. That's a well-established limitation of both SLS and SLA printing.

The classic way of getting around that is to leave a small hole in the chamber that's open to the outside - then you drain the powder out of that hole and, if needed, plug it up after you're done.


I think the parent comment was concerned about having a closed chamber full of powder when the print is done


The automatic lead advance works like this: When the lead sleeve is retracted by any amount, it springs back to it's full length and along with that advances the lead by that amount. The way this happens in practice is as you write, the lead wears down till the sleeve rubs against the paper. Usually we write with the pencil at an angle with the paper. This angle causes the lead sleeve to retract when it rubs on the paper and then when you lift the pencil for the next stroke, the lead sleeve will spring back into position advancing the lead with it.

If you're interested in more details and how the mechanism actually works, here is a good link: https://stationery.wiki/Auto-Advance_mechanism


Their Wikipedia page[1] has some of their sources of funding.

[1] https://en.wikipedia.org/wiki/Foundation_for_Defense_of_Demo...


I have a question: Would it be possible to do something like Fakespot for Yelp reviews or just restaurant reviews in general? I can appreciate that the problem is harder than say spotting fake Amazon reviews, but it seems plausible.

Given that there is really no good verification for restaurant reviews, there must be a ton of fake reviews out there. In theory, it would not be too hard to periodically crawl reviews and figure out when/if they got deleted and use that dataset to find patterns.


Another maker of excellent wooden models is Wooden City (https://wooden.city/).

We built their Ferris Wheel model. It was very well designed, a lot of fun to build and the end result was much better than we anticipated!

The 4x4 looks amazing - will be building that next.


Some of the products look the same... Is this the same company or something?


For those who want more background into what's going on, here is an excellent video from The Economist explaining the independence movement in Catalonia: https://www.youtube.com/watch?v=NaQ4_v0fz6k


I'm surprised no one has mentioned Tesla in this context. Not only do they make it almost impossible to get a Tesla car repaired anywhere but their service centers, but they also collect a ton of data [1].

[1] https://www.tesla.com/about/legal


Pretty much any new high-end vehicle is unserviceable outside of their service centers due to requiring custom diagnostic and programming equipment.

However, body and other simpler mechanical work can be done outside service centers (for Teslas too.)


Anybody have good recommendations on courses or a curated study list for someone new to Design in general? Looking to learn fundamentals before diving into more detail on any specific field.


When designing anything, "be the user". There is no more important skill for a designer.

Even creating graphic beauty or a clear data visualization fall into this category--it's your own aesthetic or intellectual judgement you use, but you always have the user in mind.

No other general principles apart from the need to be creative and open to possibilities. (Creativity is a separate issue.)



Does anybody have any good links explaining what caused the population decline in Japan?


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: