The amount of power landing on an acre is fixed, what you can achieve by tilting is having less solar panel surface area per ground cover area. If solar panels are cheaper than the mounting hardware (wow) then there is no reason not to let them lie flat on the ground (it's not as if the racks were holding them above tree shadows, or anything).
This is a great way of thinking about it, but don't you lose a bit more due to increased reflection from the glass surface at low incident angles? Probably not enough to make a difference a low latitudes in the summer, but at high latitudes in the winter I think it might be a significant difference: https://en.wikipedia.org/wiki/Fresnel_equations#/media/File:...
Partially answering myself, 'sacred_numbers' posted a link elsewhere in this thread that suggests this effect might be quite small: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6611928/. The paper concludes that for a cell with a good Anti-Reflective Coating (ARC), the reduction in efficiency due to reflection at a 60 deg incidence is only 2%.
On the other hand, the incidence for a flat mounted panel beyond 37 degrees of latitude on the winter solstice is greater than 60 degrees, and it's not clear (to me at least) how well the ARC on an average panel will continue working after years of outdoor usage. My guess is reflection is probably a real issue, but not a stopper unless one is already in a marginal situation.
I'm at 54N and my output has been 0 for the past month as we've had a lot of snowfall. My panels are at 20 degrees, so even in the few sunny days we've had it's not been enough to melt the snow. A steeper angle probably would have cleared it a few times.
Usually the beginning of the year has more sun but it's colder, so I'll see what happens then.
The solar radiation wattage per unit of surface area is dependent on the angle that surface is to the sun. The angle is dependent on the season and time of day, so the amount of power is not fixed.
What the comment wanted to say is that the power per unit of ground surface area is fixed for a given location and time, i.e. it does not matter [1] whether you cover a given area with panels angled towards the sun or lying flat on the ground, at least if one only looks at the available power. There is of course a difference in the solar panel area required to cover a given area of ground surface - solar panels lying flat on the ground will obviously have to have the same area as the ground surface area while panels angled towards the sun will only require a fraction of the ground surface area equal to the sine of the angle of the sun above the horizon.
[1] For a sufficiently large area so that effects on the edge are negligible.
You could write a few pages of all the things that the power available depends on, but you don't need to because it's fixed relative to the variables under consideration.
Per unit of panel surface area, not per unit of land area. If the sun is coming in at an angle, you'd be able to collect all that's available with less panel area than total land area by angling them (or equivalently, in this new configuration you need more panel area than you otherwise would), but in their estimation, it's cheaper to just get more panels than it is to buy and install racks.
>The solar radiation wattage per unit of surface area is dependent on the angle that surface is to the sun.
A tilted solar panel casts a shadow that is bigger than its actual area. Mounting the panel flush to the ground means it casts a shadow exactly equal to its area.
The shadow represents the captured sunlight so the first panel covers more surface area than the second panel, which allows you to reduce the number of panels to cover the same amount of surface area. The entire point of this article is that you can just put the saved costs into buying more solar panels.
Used solar panels are very cheap but usually only the solar panels are replaced and the mounts are kept and fitted with new panels. So for companies that want to use used panels their primary cost is actually in the mounting hardware and not the panels.
> If solar panels are cheaper than the mounting hardware (wow)
I'm surprised this surprises people... Every electronics hobbyist knows that electronics are cheap as dirt while any kind of box, mount, rail or whatever is BY REALLY FAR the most expensive part of a project, even when buying massivly mass produced cheap Chinese junk.
You are surprised that this surprised people because electronic hobbyists know this? Most people are not electronic hobbyists so this should probably not surprise you
I just find it interesting, the difference different perspectives can make, especially on a website where people are often bikeshedding things they have no experience with.
