Crazy that there are no in-depth answers with some EXPLAINs and profiling. Just mentions to ANSI standards.
EDIT: I realized I completely misread the question. I thought it was asking the difference of using a WHERE clause or putting conditionals in the JOIN (see my reply above for an example). The original SO questions is about an old-school CROSS JOIN `table1,table2` (which is a cartesian product in relational algebra) and a JOIN.
Edit 2: "old school" in the sense of joining tables before JOINs existed. I think it was System R the first engine to introduce efficient JOINs vs cross products.
I did a quick test in Postgres using the sample Airlines database.
Here are the two tested queries:
Query 1:
SELECT
t.passenger_name,
t.ticket_no,
bp.seat_no
FROM
Flights f
JOIN
Ticket_flights tf ON f.flight_id = tf.flight_id
JOIN
Tickets t ON tf.ticket_no = t.ticket_no
JOIN
Boarding_passes bp ON t.ticket_no = bp.ticket_no AND tf.flight_id = bp.flight_id
WHERE
f.arrival_airport = 'OVB';
Query 2:
SELECT
t.passenger_name,
t.ticket_no,
bp.seat_no
FROM
Flights f
JOIN
Ticket_flights tf ON (f.flight_id = tf.flight_id AND f.arrival_airport = 'OVB')
JOIN
Tickets t ON tf.ticket_no = t.ticket_no
JOIN
Boarding_passes bp ON t.ticket_no = bp.ticket_no AND tf.flight_id = bp.flight_id
Then I ran EXPLAIN for both of them and the query plan is THE same. So there's not a big difference at least in Postgres.
SELECT
t.passenger_name,
t.ticket_no,
bp.seat_no
FROM
Flights f,
Ticket_flights tf,
Tickets t,
Boarding_passes bp
WHERE
f.flight_id = tf.flight_id
AND f.arrival_airport = 'OVB'
AND tf.ticket_no = t.ticket_no
AND t.ticket_no = bp.ticket_no
AND tf.flight_id = bp.flight_id;
SELECT
t.passenger_name,
t.ticket_no,
bp.seat_no
FROM Flights f
JOIN Ticket_flights tf USING (flight_id),
JOIN Tickets t USING (ticket_no),
JOIN Boarding_pass bp USING (ticket_no, flight_id)
WHERE f.arrival_airport = 'OVB';
To me placing the join predicates immediately after the tables is more readable as I don’t have to switch between looking at the from and where clauses to figure out the columns on which the tables are joined.
I guess as long as you're giving it some criteria to join on, I had a coworker do these sorts of joins but never specified any real criteria for joining and the queries were always a mess and returned tons of extra junk. Personally I prefer to explicitly do the joins first.
I've usually found that this breaks down when there are a lot of filtering conditions besides the join condition, and multiple columns used in the joins. The WHERE clause gets long and jumbled and it is much easier to separate join conditions from filtering conditions.
Guys, I ran an EXPLAIN in a dockerized postgres server. You can see it in the screenshot I shared. Why did you assume I was just trusting the LLM? Jeez, Hn.
I tend to find table aliases a step down in readability, and only use them as necessary, because now your eyes have to jump up and down to see where the columns come from.
The aliases don't force you to follow each one through; eyes can do no jumping if you like in either case.
But if you can't infer from the column name which table they will come from, I find having the option to check far more preferable to that of having no way of knowing.
>I tend to find table aliases a step down in readability
I suppose it depends on your database, one of the ones I work with all the time has crazy long table and view names and aliases make resulting SQL more readable.
There used to be a difference, if I am correct. Many years ago, we had to rewrite a lot of implicit joins before we could upgrade MySQL because they changed the precedence of tables in implicit joins between major versions. I couldn't easily find this reference, but it was well over 10 years ago.
The join version is also certainly less readable for anyone who doesn't normally work with databases and is just dipping into the database handling code for some reason.
I dont usually buy the argument "make this code no longer state the intent that would normally be understood by people who know the programming language, so that it's more readable for people who don't know the programming language"
It's all about clearly stating your intent. With INNER JOIN you're literally saying "I want to join these two tables together on this particular relation and work on the result", while with the more basic WHERE form you're saying "just lump these two tables together and then we'll filter out the rows that we actually want to see". The join becomes more of a happy side-effect with that, rather than the thing you clearly want to do.
Not only does writing your code in such a way that it states your intent make it easier to read for other humans, it also makes it easier for compilers/query planners to understand what you're trying to do and turn it into a more efficient process at run-time. Now query planners are usually pretty good at distilling joins from WHERE clauses, but that form does also make it easier for mistakes to creep in that can murder your query performance in subtle and hard-to-debug ways.
> it also makes it easier for compilers/query planners to understand what you're trying to do
Hopefully that's not true. SQL's a declarative language, where you describe what you want and the system figures out how to do it. If you describe exactly the same thing using two different syntaxes, the system shouldn't really do anything different. That just makes the programmer's job harder.
Ideally, but not always true. For various versions of MySQL and Postgres, the planner will infer when a semi/anti-join can replace a WHERE [NOT] IN clause, but not always. IIRC there are still edge cases where neither one picks up on it, and so it’s always safer (and much more clear to the reader) to explicitly use WHERE [NOT] EXISTS if that’s what you want.
Also, using the ON clause is consistent with the syntax for outer joins, where you have to use it (because there's a very important logical difference between putting the condition in the ON clause vs in the WHERE clause).
I think it's better at specifying intent, similarly to how you would use "for" and "while" in a programming language even though they are literally the same thing and more often than not they compile to, respectively, identical query plans and identical asm/bytecode.
Also if you work a lot with databases you often need to do outer joins, a full cartesian product is almost never what you want. The join syntax is more practical if you need to change what type of join you are performing, especially in big queries.
I learned that syntax 5 years ago from my boss. I still prefer to use CROSS JOIN just to make it clear to other noobs like me what I'm expecting with the query.
For myself, this is even with a couple of tables valid. I think of the query as "looking up references in a book". Therefore I write global filters in the WHERE and stuff specific to a table in the ON condition.
... and once you've switched to INNER JOIN, the next question is "when is it appropriate to add to the JOIN clause vs WHERE clause?"
as in
join orders returns on returns.original_order_id = orders.order_id
WHERE <-------- Should order type be in the WHERE clause?
returns.order_type = 'RETURN'
vs
join orders returns on returns.original_order_id = orders.order_id
AND <-------- Should order type be in the JOIN clause?
returns.order_type = 'RETURN'
One argument was that JOINs are specifically for tickling indexes and only for structural joins between tables, not for describing the table itself, so it should go in the WHERE clause. ("ALL context should be in the where clause.")
One argument was that sometimes a definition is limited by context, so strategically it makes sense to add to the JOIN clause. ("the `returns` alias MUST be limited to return orders, so it should be in the JOIN"; you'd have to adjust your indexes to account for the "order_type".)
Reading the title, I thought this was the actual question at hand.
I try to keep JOIN logic to only on the keys. I like to think this makes reading the query more linear: now I have all of these tables, what data gets retained/removed?
I see it as WHERE clause joining is the "can't mess it up" way to do it, and JOIN clause joining is "better in some situations".
Imagine you're using SQL fragments. Using JOIN clauses make your code extremely clean:
<sql id="getRecentReturns">
<fragment id="ReturnOrderFragment">
where returns.order_date between sysdate - 30 and sysdate <------- Nice, clean code. No chance bugs from forgetting to add `returns.order_type = "Return"` or `employee.customer_type = "Employee"` or whatever.
</sql>
That said - if the guy making the table didn't make an index that includes your attribute (order_type and customer_type above), don't use it."
For how much the standards were referenced, nobody seemed to actually explain the history of the two syntaxes or the reasoning that led to the introduction of a dedicated join statement. If anyone has an article that summarizes the actual history (or even the RFC for introducing the JOIN syntax), I would love to read it.
I've only looked at the execution plan in SQL server, but they're the same. Because of the way they're set up you'll get an index seek and an index scan when using the ANSI syntax or the older style. The WHERE clause join does not apply a bunch of filtering on an intermediate state.
They are effectively the same but only because the set theory algebra lets the optimizer move things around.
The first one says 'put these two tables together then apply the where conditions that link them together and other stuff'. The second one says 'put these together but pay attention to this on condition when doing so and some other stuff'.
Now the set theory algebra lets the optimizers pick out parts of the where condition and move them up to the matching part. You see that in your query plan. The optimizer will also add other coditions such as what you see with the index pick and the type of matching/filtering it is using.
I personally have used/abbused the on condition to make things more clear things that really only apply to that table and matching.
Now he does ask is it the same with MySQL. Probably but someone would need to look at the query plan it spits out. But my guess is yes.
The question is sort of like asking is x + y = z the same as y + x = z. Well yeah sorta mostly. You can get weird cases where doing the order of operations differently gets you different speed profile results though. But the output is the same. But that is the fun of playing with optimizers and your knowing your platform characteristics.
With a good enough query planner and optimizer, yes. I'm not sure if that was always the case. I can imagine historically if you were joining on fields that were only indexed in one table and not the other - I'm not saying this is an intelligent thing to do, but it sometimes happens - then controlling the order of the join yourself if the database didn't optimize this for you would be important.
You're setting up a scenario where you'd be in trouble regardless though; controlling the join order would be a local optimization and query would still probably have a table scan, while appropriately indexing would solve any query planner mistakes and give you a more efficient execution in both styles.
EDIT: I realized I completely misread the question. I thought it was asking the difference of using a WHERE clause or putting conditionals in the JOIN (see my reply above for an example). The original SO questions is about an old-school CROSS JOIN `table1,table2` (which is a cartesian product in relational algebra) and a JOIN.
Edit 2: "old school" in the sense of joining tables before JOINs existed. I think it was System R the first engine to introduce efficient JOINs vs cross products.