> We already have a gas network for methane, it wouldn't be hard to mix in 20% hydrogen and then filter it back out at the other end (there's an energy cost, but it's not huge, and in any case most existing uses would not have a problem with 20% hydrogen).
Even ignoring the dangers of embrittlement of metal pipes that carry the hydrogen enriched gas, what is the cost of this methane/hydrogen filter, and what is it's safety for home use given that it's dealing with 2 highly flammable gases mixed together. I can't find anything online about household methane/hydrogen separators.
Whereas an EVSE is basically just a big electrical switch.
The UK gas network was used for many decades to transport a 50-50 mix of hydrogen and CO, called "town gas". Nevertheless the risk to the modern network should be diligently evaluated . I believe the intention is to do that anyway to the extent it is found to be safe, as blending in hydrogen reduces the carbon consumption of the gas network
Qq where did this hydrogen come from for the 50-50 mix?
From a quick reading above it looks like it came from cracking fossil fuels rather than electrolysis which is understandable but I think that should be made clear to everyone. It’s really just another way to ship fossil fuels in that sense. Burns slightly cleaner on your stove is the only real advantage here.
In town gas, yes. But that was until the 70s. The first climate change treaty was only signed in 1994. No-one wants to go back to town gas. I don't think it burned cleaner, it was made from coal. And it contained CO, which is lethal. I mention it merely as an existence proof that it's possible to ship hydrogen. I don't personally think it will be economic to do so without compromising climate goals, except as a tool to mitigate the carbon consumption of existing appliances.
> except as a tool to mitigate the carbon consumption of existing appliances.
Does it matter if you reduce CO2 it at the household point of combustion if the fuel is ultimately C02 emissions heavy? Accounting for the inefficiencies of cracking natural gas into H2, it may actually increase the GHG emissions, not to mention being more expensive (due to energy loss during the gas cracking process).
Furthermore, the primary local issue with combustion appliances is air quality, and mixing in a little H2 not going to do much to improve that.
So piping fossil derived hydrogen into gas pipes doesn't solve either GHG emissions or local air quality issues.
You're better off continuing with piped methane gas and phasing in electric heat pumps over time.
If you are putting hydrogen in the mix to reduce CO2 emissions, obviously you should not do it by cracking methane and letting out the resulting carbon.
Assuming you don't let out the carbon (or use electrolysis) then maybe there is a case for it.
Even ignoring the dangers of embrittlement of metal pipes that carry the hydrogen enriched gas, what is the cost of this methane/hydrogen filter, and what is it's safety for home use given that it's dealing with 2 highly flammable gases mixed together. I can't find anything online about household methane/hydrogen separators.
Whereas an EVSE is basically just a big electrical switch.