Hi, I'm in this field about decades and trying to learn OS development. I've an idea of FASM, NASM, FASM-G. But I need to study the output of assembler program. So I can understand how the OS is actually works in the binary level. Do you learned opcodes for the particular architecture? What did you for device driver programs? Can you please list out the steps to develop my own OS.
An x86 disassembler is not that hard, as long as you stick to a single mode and ignore the SIMD alphabet soup.
You have a short loop that scans through the prefixes, checks for a REX prefix (if you handle 64-bit mode), reads the opcode (1-3 bytes), reads the MOD/RM byte if there is one (use a table lookup), reads the SIB byte if there is one (table), reads offset if there is one (table), reads immediate if there is one (table).
It's probably easiest if you use an "expanded/normalized" opcode internally so the 1-3 opcode bytes + the 3 extra bits from some MOD/RM bytes + prefix info (for certain SIMD instructions) map to a single 16-bit opcode (likely around a couple hundred to a thousand opcodes in total).
You have a table that maps those to mnemonics + operand info. You have some tables that map 0-7 (or 0-15) to AL/AH/... and AX/BX/CX/... and CS/DS/ES/... and various system registers.
Not that much code all in all. Several tables. You can squeeze them and bit pack them to your heart's content if you want.
Once you have that, a simple assembler isn't so hard.
